24-hour parking monitor

24-hour parking monitoring. When a collision occurs during parking, the system will automatically start video monitoring to protect your vehicle for 24 hours.

High sensitivity lens for clearer shooting

High sensitivity lens can also take high-definition photos in harsh shooting environment to ensure driving safety.

Cycle save, auto delete

With the new intelligent overlay technology, when the space of the TF card is insufficient, the previous video can be automatically deleted to realize circular recording and support emergency automatic recording.

120 ° wide angle

120 ° wide angle, the field of vision increases by 25%, and the ultra wide angle field of vision can more intuitively see and record the road conditions.

WDR technology and large caliber

It can show excellent image quality and bring excellent night vision effect in both day and night.

Collision detection system

The Built-in gravity detection system detects the collision sensitivity, and automatically locks the video in case of collision to avoid deletion.

6 bead glass lens

With all glass transparent lens and better filtering technology, it can effectively block the clutter under light, and maintain good image quality no matter day or night.

Portable and parking monitors

After the flame goes out, continue to record the video, just move the monitor, identify the moving objects, and save storage space.

Installation instructions

How to install the machine

Note: due to different models and styles, the installation methods are slightly different, but the methods are roughly the same. The above pictures are for reference.
Note: due to different models, please ask professionals to assist in installation. This method is only for reference.

detailed description:

1. Select the correct position: fix the recorder and rearview mirror with a belt (the suction cup type can be directly fixed at the position of the front windshield), fix the machine and connect the power hole.
2. Determine the wiring path: insert the power line along the ceiling and door putty, and then pull it out along the tape.
3. Determine the path of the wiring circuit: use the wiring circuit under the bracelet to hide the redundant wires below, and leave a suitable wire to connect to the cigarette lighter.
4. Power socket: insert cigarette lighter and install recorder.